How To Stencil

Step by step instructions to ensure you get the best results with stencils, first time and every time.

Start by gathering your equipment...

We're using one of our stencil design, a stencil brush, some chalk paint, and a little low tack stencil tape for this quick starter demo.



The stencil

Choose a design you like and a size that's appropriate for your project. Here you can see a selection of some of our new Stencil, tiny stencil designs suitable for all small stenciling projects, craft and furniture painting.




Stencils come in many sizes and designs and may be cut from various types of material including card, plastic or metal. We design and laser cut all of our stencils from durable and reusable 190 micron Dupont Mylar plastic which is fully washable. Stencils should always be stored flat for future use.

We have loads of stencils to choose from ranging in size from Small 6” to 30”, we suggest starting small if you haven't tried stenciling before. If upcyling is your thing Stencil may be perfect for adding a stenciled border or embellishment detail. For bigger projects choose a larger format stencil like our Large & Extra Large stencils. These larger stencils are great for adding detail to a feature wall or creating an all-over pattern similar to wallpaper. Stencils offer more creative scope than wall stickers, allowing you to paint them any color you like, reuse them and add pattern to almost any surface including fabric, furniture and floors.

Keeping the stencil static

To ensure the stencil stays in place whilst painting it's best to secure with low tack stencil tape or spray mount.

There's a host of products on the market..


Top Tip - if you can't get your hands on low tack tape just remove some of the stick from masking tape by applying the tape to some fabric (like your jeans) before sticking the stencil in place.

Spray mount is a repositionable aerosol adhesive and is available from art shops, diy & craft stores, just follow the instructions on the can to apply a thin layer of glue to the reverse of the stencil.


Any type of paint can be used to apply the stencil to your chosen surface, just use the most appropriate paint for the job in hand. Remember that the thicker the paint, the better the results. Thinner paint has a tendancy to seep behind the stencil causing blotches and bleeding. For most wall and furniture projects we've found that acrylic paints and chalk paints work really well giving good even coverage.




Applying the paint

You could use stencil brushes, pieces of sponge, foam rollers or even fabric to apply the paint. Our preferred method with smaller projects is a stencil brush. Stencil brushes have a flat end and are designed to be used at a 90 degree angle to the stencil, this ensures minimum paint bleed and a sharp finish to your stenciling.


Stencil brushes come in a variety of sizes. Choose brush size according to stencil size and one brush for each color you choose to use.




Other useful things

A paper plate and some kitchen towel or scraps of paper for decanting paint and prepping the brush.


Ready to go?


We're stenciling onto a piece of paper for this demo but the technique is exactly the same for walls, fabric, furniture and any other surface you fancy!




Start by sticking the stencil in place.

Just use a few small pieces of tape around the edge of the stencil to hold it in place whilst you paint. You could just hold the stencil with your free hand but it's important not to let the stencil move at all.




Pour a little paint onto a paper plate.

You'll be surprised at how little paint you're going to need! Load the very end of the brush with some paint - then...


..remove most of the paint!

Simply blot and swirl the brush onto another part of the plate or some kitchen towel to distribute the paint evenly on the bristles and remove excess paint from the brush. You're aiming for a virtually dry brush here.



Begin stenciling

Apply the brush to the stencil in a dabbing or swirling motion. A bit like a Woodpecker! Keep the brush upright and at 90 degrees to the stencil at all times.


Pay particular attention to the edges of each hole in the stencil. There are lots of cool shading techniques which we'll cover another day but to start with just concentrate on filling in all the cut parts of the stencil. Only reload the stencil brush when no more paint is available.



If you fancy adding another color, go for it. To keep colors separate use another stencil brush and wait for the first color to dry, but, if it's a blended look you're going for you could try adding a second color whilst the first paint color is still tacky and blending by overlapping with the second.

Remove the stencil

Once you've finished painting the stencil it's time for the big reveal! Just peel the stencil away and voila, you're an artist!!


Top Tip - Remove the stencil before paint dries, especially if the paint is quite thick. There is a danger of peeling paint from your stencil applied surface if you allow a film of paint to dry across the stencil!


How simple was that! You should be left with a nice crisp applied image.


Now you know how easy it is to stencil you can start to see the possibilities. Be as creative as you like, mixing and matching designs, applying stencils in all sorts of patterns, using any color you like and applying paint using various techniques.




So what are you waiting for? Take a look at some stencils and get stenciling...